Table of Contents
Advertisement
iNStRUctioNS FoR USe
• Place the appliance on a level, heatproof surface and plug into a
suitable mains socket.
• Press the button marked 'I/0' to turn the appliance on. The on/off
button will illuminate, indicating the appliance is on and the rollers
are heating up.
• When heating the rollers, keep the lid closed to ensure the rollers
reach maximum heat.
• The rollers are ready to use when the heat ready dot turns from red to
white. The heat ready dot is located on top of one of the rollers.
• Allow the rollers to cool until they feel comfortable to apply to the hair,
failure to do so may lead to discomfort.
• Comb the hair thoroughly and position the hair in a side or middle
parting.
• Choose one of the 3 sizes of rollers.
• For best results, always start styling the hair at the top of the head and
work downwards towards the nape of the neck. Start applying the
rollers to the hair line around the face and work backwards towards
the crown of the head.
• Take a section of hair the same width as the roller.
• Wind the end of the hair around the roller tightly. Hold the hair taut
and keep the roller at right angles to the scalp to ensure even curls.
• Continue to wind the hair around the roller, until you reach the roots.
Slide the pin over the roller, through the hair and away from you to
hold in place.
• Once the rollers have been applied to the top layer, start adding the
rollers to the next section of hair. Continue adding the rollers to the
hair until you reach the nape of the neck.
• When all rollers have been used, switch the appliance off at the mains
and unplug.
• Let the hair cool down in the rollers so that the curl can set.
• To remove the rollers from the hair, hold in one hand and remove the
pin with the other hand.
• Slowly unroll the roller (do not pull) and let the curl bounce back once
the roller has been removed from hair. Repeat the process until all
Advertisement
Table of Contents
