PnP/PCI Configurations
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
Resources Controlled By
IRQ Resources
PCI1 IRQ Assignment
PCI2 IRQ Assignment
PCI3 IRQ Assignment
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Resources Controlled by
Manual
User can set the PnP resource (I/O Address, IRQ & DMA channels) used
by legacy ISA DEVICE.
Auto(ESCD)
BIOS automatically use these PnP rescuers. (Default value)
IRQ Resources ( 3,4,5,7,9,10,11,12,14,15 )
PCI Device
The resource is used by PCI device.
Reserved
Set the resource to reserved.
PCI1 IRQ Assignment
Auto
3,4,5,7,9.,10,11,12,14,15 Set 3,4,5,7,9,10,11,12,14,15 to PCI1.
PCI2 IRQ Assignment
Auto
3,4,5,7,9.,10,11,12,14,15 Set 3,4,5,7,9,10,11,12,14,15 to PCI2.
PnP/PCI Configurations
Figure 7: PnP/PCI Configurations
Auto assign IRQ to PCI 1. (Default value)
Auto assign IRQ to PCI 2. (Default value)
Auto
Press Enter
Auto
Auto
Auto
4 3
BIOS Setup
Item Help
Menu Level