QUICK START GUIDE
Control Operation
CONTROL FUNCTION GUIDE
FUNCTION
ON/OFF
Toggle lights
Adjust temperature
View temperature in unit
Toggle between F/C
First Use
All U-Line controls are preset at the factory. Initial startup
requires no adjustments.
NOTICE
U-Line recommends allowing the unit to run
overnight before loading with product.
U-Line recommends discarding the ice produced
during the first two to three hours of operation
to avoid possible dirt or scale that may dislodge
from the water line.
Up Down
COMMAND
Press
and release
Press
and release to leave interior
light on for 3 hours
Press
and release
or
Press
together and release
and
Hold
and
for five seconds
Light Power
DISPLAY/OPTIONS
Unit will immediately turn ON or OFF.
Glass door wine and beverage centers only.
When the "F" or "C" in the display is flashing, press
or
to adjust the set point temperature.
The display will flash and then toggle from set point
to temperature in unit.
The display will change units.
When plugged in, the unit will begin operating under the
factory default settings. If the unit was turned off during
installation, simply press
switch on. To turn the unit off, press
seconds and release.
6
u-line.com
Not
Alert
Used
LED
and the unit will immediately
and hold for 5
Need help?
Do you have a question about the Combo U-CO29FB-00A and is the answer not in the manual?
Questions and answers