Security; Supervisor Password - Gladius G0720 User Manual

BIOS

3.4 Security

Supervisor Password

Set Change Supervisor Password to enter and change the options of
the setup menus. When you select this function, the following message will
appear at the center of the screen to assist you in creating a password.
Enter New Password:
Type the password up to six characters in length, and press <Enter>. The
password typed now will clear any previously entered password from CMOS
memory. You will be asked to confirm the password. Type the password again
and press <Enter>. You may also press <ESC> to abort the selection and not
enter a password.
- 75 -