I/O Ports - Gladius G0720 User Manual

1.5.3 I/O ports

• Connect to one end of the
vehicle power line attached
with the cradle. Another end
shown above is connected to
the vehicle power-supply unit.
• Plug a LAN cable (in RJ-45 type)
to the LAN port for connecting with
net work devices, such as ADSL
modem.
• Connect to
speakers or
earphones.
• Connect to a
microphone.
• Use a DB-9 female connector
(D-Sub) to plug into the COM
port to connect with serial de-
vices, such as modem, console
devices, or data gateway.
- 88 -
• Use USB cables to
connect the rugged PC
with external devices,
such as CD-ROM,
hard disk drives, cam-
era or card reader.
• Screw the GPS antenna
connected with the cradle
itself on the SMA jack to acti-
vate optional GPS module.
Appendix