Lowering The Antenna - Maxview B2590/65 Installation, Operation And Instruction Manual

Crank-up
Table of Contents

Advertisement

Lowering the Antenna

1. Rotate the Dish Direction Unit until it aligns with the Base Plate and Lock Azimuth (green)
2. Lower the antenna by rotating the Elevation Handle anti-clockwise (approximately 25 turns
from 25 degrees until you see home position in the window)
NOTE: The Home Position will go past the Elevation window once during the lowering
operation before you see the Home Position for the second time. This is normal operation.
3. Slowly turn the handle until elevation indicator fully shows the home position and you feel
some park resistance. Do not over wind the handle as this may damage the satellite
system.
Elevation
Home Position
CAUTION: As a manual system we always recommend the '3 point safety check'
Before travelling;
1. Elevation readout must show the Home position (check park resistance felt)
2. Azimuth Lock Lever must be in the Green Position and Park arrows aligned
3. Visual check on your roof to ensure the Antenna is fully lowered.
Lock Azimuth
Antenna Down
19
Align Dish direction
pointer to Base plate
Arrows aligned for
travel

Advertisement

Table of Contents
loading

This manual is also suitable for:

B2590/85

Table of Contents