Table of Contents
Advertisement
5. Place the Base Plate over the Coupler Bush. Point the arrow to the rear of the vehicle.
Mark the four fixing holes. Drill four 2.5mm pilot holes or use a bradawl. With four No10
screws fix the Base Plate to the ceiling
6. Take the Dish Direction Unit and turn the azimuth lock lever to the red position to release
the brake. Locate the Dish Direction onto the Coupler Bush and use three M4 screws fix it
in place.
Azimuth lock lever
Red
= Unlocked
Green
= Locked (safe to travel)
14
Note: Rear of Vehicle
Align the arrows
Advertisement
Table of Contents
