4- Radar Signal Detector Setting; 5- The Introduction Of Self-Created Coordinate - SJ -L869 User Manual

4- Radar Signal Detector Setting

▲ Hold the 【+】 key on the interface of SJ-L869 for 3 seconds until radar signal detector
setting is available.
▲ ultrahigh level: radar signal detector setting is ultrahigh, it is
recommanded to use while driving in highway.
▲high level:radar signal detector setting is high, it is recommanded to
use while driving in highway.
▲medium level: radar signal detector setting is medium, it is recommanded to use while driving
in city.
▲Low level: radar signal detector setting is low, it is recommanded to use while driving
in city.

5- The introduction of self-created coordinate

The product is built-in 256 record of huge capacity. It provides the user set coordinate warning
location and fix the warning by limit setting. After finishing setting, while the user passes
by the self-created coordinate, the system would announce【the self-created coordinate is
ahead, please drive with caution】 and display distance countdown.(if the user is under the
limit speed, it announces 【the self-created coordinate is ahead, limit speed XX KM, please
drive with caution】 while passing. After passing the coordinate, the system would make a
finished noise of self-created coordinate, the screen would display 【 PASS 】 at the same
time.
How to collect self-created coordinate
Favourable self-created coordinate
The diving direction is the same with photo shot direction. For example, the car drives to
east, the user press 【SET】 key while being away from target 5 meters, after finished, the
system announces 【self-created coordinate finished】. Please refer to the illustration of
details:
37