Catalog Appearance ................................ 5 Installation Steps ..............................8 Learning the remote control ..........................17 Reset the default settings........................17 Multimedia Message Setting ........................... 18 Authorized Number ............................20 SOS – Send MMS Message ..........................21 GPS real-time position tracking via mobile ...................... 22 GPS real-time position tracking via server .......................
Page 3
Warranty Service and Responsibility The information contained in this document is proprietary and confidential information of Sheng Jay Automation Technologies Co., Ltd. Any unauthorized reproduction, use or distribution is strictly prohibited. This document and information is intended solely for authorized hang Jay Automation Technologies Co., Ltd.
Page 4
Standard Package Device RF remote-control Car Charger USB extension cable Software CD...
Appearance Power Button Volume down Volume up Set-up Ultrasonic Camera electronic o'clock Time Ultrasonic wave compass wave...
Page 6
Appearance2 E dog set-up G-sensor Ultrasonic air pressure Micro SD slot Power input wave sensor sensor Learning Sensor System System SIM card 退卡鈕 remote setting setting reset slot control port RF remote-control Anti-theft system off Anti-theft system SOS urgent Undefine button...
Page 7
2. Insert the SIM card, with the chip side on the top. Please remember to remove the PIN code in your SIM card before setting. 3. Set Micro SD card in your SJ-L869. The Micro SD card supports up to 2G.
Installation Steps Execute the Setup file in CD , open the setup interface, and click Next. Execute the Setup file in CD, open the setup interface, and click next. Enter the password 「sja」 with lowercase and click Next.
Page 9
You can also select the destination location and click Next. Install it in the following Start Menu folder, You can designate any name you like, set it as SJ-L869, and click Next to continue.
Page 11
Create desktop icon, and click Next. Click install to continue with the installation.
Page 12
Click Finish to exit Setup. Link the set-up port of SJ-L869 by USB extension cable, the computer would search Driver automatically. Click automatic set-up software to continue.
Page 13
10. Waiting for searching. 11. Select SJA-SJ-L869 in the list and click Next. 12. Click keep setting.
Page 14
12. Waiting for the setting finished. 13. Click Finished, you can find the execution files on desktop, click it to enter the setting...
Undefined button Hold the LK key on the interface of SJ-L869 for 5 seconds until L/K being light on. Press any key of the remote controller. The device buzz four times, when it has learnt the controller. Up to 4 remote controllers supported.
Software Setting Please install the file of dotNetFx40 in the CD if you can use software settings. Run the “SJ-L869.exe” Connect the USB extension cable to SJ-L869 and your computer. 設定介面 Multimedia Message Setting SOS、siren will send a multimedia message to the phone number you register.
Page 19
You have to finish the multimedia register. The message setting is different according to different telecommunications Please acquire the correct setting with the SIM card telecommunications. How to Set Click “Connect” Key in the SIM card setting mobile number in authorized number No.2 /No.3/No.4 Click “Set”...
Authorized Number Security alarm、SOS alarm、Low battery alert SMS and SD Card warning SMS will be sent to the authorized number Only authorized number can change the L869 setting via SMS. The unauthorized number will not get any reply from L869 How to set 1.
SOS – Send MMS Message Press SOS button on the remote controller to make vide call to authorized number. The L869 will call to second authorize number first. If second authorized number does not pick the phone, L869 call next (third) authorized number. Priority call: Authorized number NO.2->...
Press the SOS button on the remote controller ※Make sure your remote controller has been learnt by the device . Please refer the “RF Remote Controller selection”and “The Setting of Multimedia Message.” GPS real-time position tracking via mobile Send SMS to the L869get the location map. Send LOCATION to the L869 L869 reply a SMS “TRACKING PLEASE WAIT”...
GPS real-time position tracking via server L869 sends data to the remote server by GPRS continuously. User can see the real-time status of SJ-869 on the server ※Before it work, please confirm that the CPRS of your SIM card has been activated with the...
Page 24
How to set 1. Device ID 2. Name an ID for the device. The device ID will be show on Server. 2-12 bits upper and lower case English letters allowed. 3. APN Name Input APN of the SIM card to activate the GPRS. Please contact your SIM card provider to get the APN.
Page 25
Set an IP address and port for your server. If Server IP_1 link is failed or input column is empty, device auto-connect to Server IP_2 Device server connection priority DNS > IP 1 >IP 2 7. Server IP_2 Set the backup IP address and port for your server. The server IP_2 will assign an IP address to the device, when it received a connect request.
Security Alarm Press the “Security on key”on the remote controller to activate the security system If one of security sensor has been triggered, the L869 will send a picture to authorized number to notice the car owner while detecting any unusual invasion. Authorized number pick the phone call and press key “5”...
Time Zone Set your time zone in your area Geo-Fence GEO-Fence is a virtual perimeter for a real-world geographic area. You can set 5 GEO-Fences for the L869. Geo-fence can be a predefined set of boundaries by user; the boundaries could be set from 100 meter to 25.5 KM. If you come into or out of the Geo-fence (boundaries), L869 will send a message “GEO-Fence ALARM”by SMS to user.
Page 28
Double click mouse right key or Mouse scroll wheel backward 5. Mark your location Click a location that you wanted on the map, and you can see a red balloon on it. Click “Mark” key to request the latitude and longitude of the marked position on the map and display at Center Position column.
10. Click the set Save Cellular Positioning When L869 is indoor or the GPS signal is too weak, L869 will use base station to position and send based station information to the ALARM number. Use the based station position, it will be a range area not a position location.
Low-voltage alert The Low battery SMS will be sent to first Authorized number. L869 detect the voltage of the battery to make sure device work well. When the voltage of the battery is low, L869 sends the SMS immediately to alert the authorized user.
SMS Configuration Authorize number Security alarm、SOS alarm、Low battery alert SMS and SD Card warning SMS will be sent to authorized number SMS: AUTHOR:number Use “/” to input more number. 4 sets maximum EX: AUTHOR:0912345678/0923456789/0913673079/0913654679 L869 reply AUTHOR:0912345678/0923456789/0913673079/0913654679 ok Location Check the current location the L869. L869 will send a Google Map link to the SMS sender SMS: LOCATION L869 reply “TRACKING PLEASE WAIT”...
Surrounding Setting and the information of device IMEI Check device’s IMEI code by click “Read” Language Change the software display language. It supports Traditional Chinese / Simplified Chinese / English. Input / Output the setting file Save this setting to another file, it can be completely imitate afterward. Output Click the Output to export the setting file Name your setting file.
Page 33
Input Click the Input the load the setting file. Select the setting file *.sja Click open...
Radar Speed Camera Detector Detect kinds of speed camera detector on the way, and built-in e-dog radar detector and complete data bank. Start to mark your GPS position after being turned on, and the panel supports electronic compass to display your direction and GPS time. ■...
1. System Function Setting ▲Hold the 【SET】 key on the interface of SJ-L869 for 3 seconds until system function setting is available. After enterting system function setting, everytime you press【SET】 key for 1 second, you can select setting in turn,and hold the 【SET】...
▲ Hold the 【VOL-】 key on the interface of SJ-L869 for 3 seconds until driving mode setting is available. Save driving mode could not only remind the user fixed speed camera location and distance countdown, but remind such as the locations which accidents often occur, the markets, the schools, the gas stations, the tollbooths and so on.
4- Radar Signal Detector Setting ▲ Hold the 【+】 key on the interface of SJ-L869 for 3 seconds until radar signal detector setting is available. ▲ ultrahigh level: radar signal detector setting is ultrahigh, it is recommanded to use while driving in highway.
Page 38
▲ The user press 【SET】 key while being away from target 5 meters, after finished, the system announces 【self-created coordinate finished】 automatically. And returns to display the car speed after 2 seconds. Contrary self-created coordinate The diving direction is contrary with photo shot direction. For example, the car drives to west, the user press 【SET】...
Constant Speed Setting and Collect the relative consider value constant speed cruise Collect distance(with the target) (limit speed) 10-30 KM About 150 meters 40-60 KM About 300 meters 0 or 70-80 KM About 500 meters 90 KM About 700 meters 100-150 KM About 1000 meters The rule of collecting self-created coordinate depends on...
Instruction of E-dog driver downloading and installation ▲ Enter SJA’s official website:http://www.ecarfj.com, and click the section of data downloading 1. Open the web page of downloading center, Log in with order number on the back of the product 2. click“ ”to download the driver.(You have to upgrade the driver if it’s the first time)...
Page 41
Download the data of Driver.exe 文件( If it’s blocked by firewall, please allow all operation.) If the driver starts to install, the screen would display:...
Page 42
Instruction update the downloading and installation Click the picture as to download the data update Execute the data update Please confirm the device has been connect to the computer, and click Summit.exe...