Page 1
Technical Manual Mobile Communication Repeater Models: JD55-PR819/JD55-PR918/JD55-PR93G Page...
Page 2
Table of Contents Introduction Name & Function How to install the system User Attentions Troubleshooting Specifications Page...
Page 3
Introduction The JD55-PR Repeater Kit is a great choice to improve the cellular reception of VIP rooms, offices, homes, restaurants, apartments, underground parking areas, etc. The JD55-PR series consumer repeater enhances consumer satisfaction greatly with its integrated design, compact size, easy engineering and rapid installation.
Name & Function - Front- - Side - Outdoor (Donor) Antenna RF Port DC Power Input Indoor (Service) Antenna RF Port Alarm Status LED Power LED (Upper Band) Alarm Status LED (Lower Band) Page...
Repeater The repeater amplifies and transmits signals of the base station in the desired area. Outdoor ANT The outdoor antenna connects to the Outdoor Port on the repeater. PWR Exterior adapter having AC 95-265 V input, supplies DC 9 V power to the repeater to run active circuits.
How to install the system Installation procedure Check contents of package Identify installation location for both outdoor antenna and indoor unit Measure signal strength of proposed location for donor antenna outside Install donor antenna and route coax cable Fix repeater to the wall Connect power supply adapter Adjust donor antenna on roof for optimum signal strength &...
Page 7
Checking the contents supplied Identify a suitable location where you would like mount the indoor repeater Ensure the location is properly isolated from the donor antenna and the cable length supplied is sufficient. Locate a suitable location for the outdoor donor antenna and identify a ...
Page 8
How to install the system –(indoor) Bracket 1 Installation step 1 Bracket 1 Bracket 2 Installed Installation step 2 Page...
Page 9
System Installation Complete Donor Antenna on Roof Coax cable Important! Do not open the case of repeater. Do not place excessive pressure on the repeater. Please use the power supply that is supplied with the kit ONLY! Other power supplies will void warranty and can damage the repeater.
Make sure there is no sharp bends, or Coaxial cable connecting the repeater and outdoor antenna breaks in the cable. If needed, replace might be defective coaxial cable 3) For more information, call JDTECK Ltd. at 1-877-453-8325 or email us at sales@jdteck.com Page...
(CDMA / TDMA / GSM 1990 (MHz) Impedance 50ohm 850 / PCS) UL - 824-849 / 1850- Part # JD55-PR819 1910 (MHz) Dimensions (W x H x D) 183 x 128 x46.3mm DL - 935-960 / 2110- B. Frequency Range 2170 (MHz) Weight <...
The antenna used for the transmitter must not be connected to, or operating in conjunction with any other antenna or transmitter. Modifications not expressly approved by JDTECK could void the user's authority to operate the equipment under FCC rules. Page...
Need help?
Do you have a question about the JD55-PR819 and is the answer not in the manual?
Questions and answers