Memory Functions - Mercedes-Benz G-Class Operator's Manual

Using the memory button
Left-hand exterior mirror
:
Right-hand exterior mirror
;
Adjustment button
=
Memory button
?
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M ?.
Make sure that the SmartKey is in posi-
X
tion 2 ( page 133) in the ignition lock.
Y
With the exterior mirror on the front-
X
passenger side activated, use adjustment
button = to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
Press memory button M ? and one of the
X
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
the steps.

Memory functions

Calling up a stored parking position set-
ting
Left-hand exterior mirror
:
Right-hand exterior mirror
;
Adjustment button
=
Memory button
?
Turn the SmartKey to position
X
2 ( page 133) in the ignition lock.
Y
Adjust the exterior mirror on the front-
X
passenger side using button ;.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
if you press button : for the exterior mir-
R
ror on the driver's side
Memory functions
Storing settings
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
95
Z