Canon PowerShot G9 User Manual page 95

Shooting Using the Mode Dial
193
I
P
Program AE [i:i]
~ See Functions Available in Each Shooting Mode (p. 270).
Shooting Mode
f!IIID SeN
cQ
IIJItI
P Tv Av M
i
- T
.a-..:=:.
.~
"_ _ __
._._J
The camera automatically sets set the shutter speed and aperture
value to match the brightness of the scene. You can set the ISO
speed, exposure compensation and white balance.
1
Set the mode dial to P.
2
Shoot.
• When a correct exposure cannot be obtained, the shutter
speed and aperture values are shown in red on the LCO
monitor when the button is pressed halfway. Use the
following shooting methods to obtain the correct exposure
and make them show in white.
- Use the flash (p. 74).
- Adjust the ISO Speed (p. 84).
- Change the metering method (p. 136).
- Set the NO filter on (p. 132).
• You can change the combinations of shutter speeds and
aperture values without altering the exposure (p. 129).
•
Shooting Using the Mode Dial
193
I
P
Program AE [i:i]
~ See Functions Available in Each Shooting Mode (p. 270).
Shooting Mode
f!IIID SeN
cQ
IIJItI
P Tv Av M
i
- T
.a-..:=:.
.~
"_ _ __
._._J
The camera automatically sets set the shutter speed and aperture
value to match the brightness of the scene. You can set the ISO
speed, exposure compensation and white balance.
1
Set the mode dial to P.
2
Shoot.
• When a correct exposure cannot be obtained, the shutter
speed and aperture values are shown in red on the LCO
monitor when the button is pressed halfway. Use the
following shooting methods to obtain the correct exposure
and make them show in white.
- Use the flash (p. 74).
- Adjust the ISO Speed (p. 84).
- Change the metering method (p. 136).
- Set the NO filter on (p. 132).
• You can change the combinations of shutter speeds and
aperture values without altering the exposure (p. 129).
•