Volume Adjustment; Audible Beep Confirmation; Resetting The System - Jensen VX3020 Operating Instructions Manual

Mute
Press the volume knob on the front panel or press the [MUTE] Button on the
remote control to mute the volume from the unit.

Volume Adjustment

Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder on the front
panel. When the volume level reaches "0" or "50", a beep sounds, indicating that
the adjustment limit has been reached. The TFT screen displays the volume level
for 3 seconds.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The beep tone can be
disabled through the Setup menu.

Resetting the System

Soft Reset - To correct a system halt or other illegal operation, use the tip of a pen to
press and release the reset button located just below the front panel control knob.
For a Hard Reset- Touch the System Reset Icon on the Third Settings Screen.
After a system reset,the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the unit will return to Main Menu
once the reset is complete.
Change Aspect Ratio
Press the [WIDE] key on the remote control to adjust the aspect ratio.
Image Settings
1. Enter image setting mode by pressing the [PIC] Button on the remote control.
2. Select the item to be adjusted and touch the Left or Right direction icons
[ ]/[ ] on the user interface to adjust the value.
3. To exit image setting mode, press the [PIC] Button on the remote control again
or simply stop making adjustments.
16
128-9278 VX3020 Operating Instructions 02 20 2014.indd 16
[RESET] Button
Figure 5. System Reset Button
Figure 6. Image Settings Screen
VX3020
2/20/2014 6:19:01 PM