Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Rodia 3515RS
Summary of Contents for Rodia 3515RS
- Page 1 STONE SAW RODIA 3515RS OPERATING MANUAL...
- Page 2 Keep this Manual in a safe place for future reference. Enter the Serial Number of your new Rodia ® 3515RS Stone Saw in the box below. The Serial Number is located on the switch box. PAGE 2 RODIA 3515RS OPERATING MANUAL V11/2006R1...
-
Page 3: Table Of Contents
3. OPERATING INSTRUCTIONS Cutting Procedure ......................14 45˚ Miter Cutting ......................14 4. MAINTENANCE AND TROUBLESHOOTING General Maintenance ....................... 15 Diamond Blade Dressing ....................16 Troubleshooting ........................ 17 5. SPARE PARTS Spare Parts ........................18 RODIA 3515RS OPERATING MANUAL V11/2006R1 PAGE 3... -
Page 4: Rodia Safety
If the instructions are not followed tools are removed or in their proper storage area it is possible that serious injuries could occur as before the machine is turned on. well as death. PAGE 4 RODIA 3515RS OPERATING MANUAL V11/2006R1... - Page 5 Do not force the equipment to ment. If proper footing is not observed by do something that it wasn’t designed to do. doing such things as overreaching, serious injury may occur. RODIA 3515RS OPERATING MANUAL V11/2006R1 PAGE 5...
- Page 6 Any part of the machinery that is damaged should be checked carefully to determine whether or not it should be used and whether or not it can function properly for its intended use. PAGE 6 RODIA 3515RS OPERATING MANUAL V11/2006R1...
-
Page 7: Hazard Symbols
OFF position is to prevent serious injury, before plugging the machine into death or damage to the an electrical outlet to prevent equipment. accidental starting of the machine. RODIA 3515RS OPERATING MANUAL V11/2006R1 PAGE 7... -
Page 8: California Proposition 65 Message
Your risk from these exposures varies depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. PAGE 8 RODIA 3515RS OPERATING MANUAL V11/2006R1... -
Page 9: Electrical Requirements And Grounding Instructions
Shock Hazard. For replacement, use only an of electric shock. The equipment-groun- identical Rodia water pump, Item # 6.513.298 ding conductor is the insulated conductor that has an outer surface that is green with or without yellow stripes. -
Page 10: Tile Saw Specific Warnings
It is important to not abuse the extension cord and and cleaning. do not yank on any cord to disconnect it from the Use the machine only with Rodia 10” ● outlet. wet cutting blades. -
Page 11: Machine Specifications
Noise level ........80 dB (A) sockets at the underside of the water container and Noise level during sawing ....90 dB (A) fastened with the knobs. RODIA 3515RS OPERATING MANUAL V11/2006R1 PAGE 11... -
Page 12: Unpacking And Setting Up
● be positioned at the desired height. after the motor has cooled down. The saw head is tightened by a spring and may accidentally jump up when the knob is loosened. PAGE 12 RODIA 3515RS OPERATING MANUAL V11/2006R1... -
Page 13: Installing The Saw Blade
Fit the new cutting blade on the center ring ● of the motor flange. (Check the direction of rotation and make sure the blade is well centered) Mount saw flange and tighten with the ● hexagon nut. RODIA 3515RS OPERATING MANUAL V11/2006R1 PAGE 13... -
Page 14: Operating Instructions
● ● complete. retaining knob. 45˚ Miter Cutting: Cutting Guide The Rodia® 3515RS Stone Saw is designed to perform 45˚ Miter Cuts without additional tools. Retaining Knob Position the Adjustable Cutting Guide to ● desired cutting length. Tighten the retaining knob. -
Page 15: Maintenance And Troubleshooting
When the machine is not used for a longer ● period, the pump should not remain in the muddy cooling water. Cleaning the pump as described above and leaving it outside the water container is recommended. RODIA 3515RS OPERATING MANUAL V11/2006R1 PAGE 15... -
Page 16: Diamond Blade Dressing
Dressing Stick. Dressing procedure(s): Place a Dressing Stick on the Saw table ● Make approx. 10 cuts through the ● Dressing Stick The Diamond Blade should be sharp again and ready for efficient cutting. PAGE 16 RODIA 3515RS OPERATING MANUAL V11/2006R1... - Page 17 Machine should now be level Unlevel working surface. Make sure the machine is placed on a level surface. Improper or glazed Diamond Replace or dress the Diamond Blade. Blade. RODIA 3515RS OPERATING MANUAL V11/2006R1 PAGE 17...
-
Page 18: Spare Parts
SPARE PARTS PAGE 18 RODIA 3515RS OPERATING MANUAL V11/2006R1... - Page 19 6.509.090 HANDLE 6.005.792 KNOB 6.509.053 HANDLE 6.516.012 MOTOR FLANGE 6.516.011 SAW FLANGE 6.516.013 FLANGE NUT 6.513.295 PUMP 4.800.080 GUIDING ROL 6.504.117 BALL BEARING 6.504.170 BALL BEARING 6.509.095 HANDLE 6.513.210 THERMAL PROTECTION 6.513.222 SWITCH RODIA 3515RS OPERATING MANUAL V11/2006R1 PAGE 19...
- Page 20 PAGE 20 RODIA 3515RS OPERATING MANUAL V11/2006R1...
Need help?
Do you have a question about the 3515RS and is the answer not in the manual?
Questions and answers