Advertisement
Quick Links
The design and specifications are subject to change without
prior notice for product improvement. Consult with the sales
agency or manufacturer for details.
CR052-RG51M5
202055091282
20130722
OWNER S M ANUAL
REMOTE CONTROLLER
Please read this Owner's Manual carefully before operation.
Save this manual in a safe place for future reference.
Advertisement
Related Manuals for Pridiom CR052-RG51M5
Summary of Contents for Pridiom CR052-RG51M5
-
Page 1: Remote Controller
The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. Please read this Owner's Manual carefully before operation. Save this manual in a safe place for future reference. CR052-RG51M5 202055091282 20130722... - Page 2 CONTENTS 3. Set the starting & stopping time 3.1 Push the TIMER ON button, the remote controller will show TIMER ON, the last set time for START operation and the Remote Controller Specification..........signal "h" will be shown on the DIGITAL display area. You Performance Features------------------------------------------------------- are now ready to readjust the TIMER ON to start the operation.
- Page 3 Remote Controller Specification TEMP Button : Push this button to decrease the indoor temperature setting in 1 F increments to 62 F. Model RG51M5/(C)EU, RG51M1/EU1 TEMP Button : Push this button to increase the indoor temperature setting in 1 F increments to 86 F. Rated Voltage 3.0V(Dry batteries Lr03 2) NOTE: Press and hold...
- Page 4 TIMER OFF Button: Press this button to initiate the auto-off time ON/OFF Indicator: This symbol appears when the unit is turned sequence. Each press will increase the auto-timed setting in 30 on by the remote controller, and disappear when the unit is minutes increments.
-
Page 5: Automatic Operation
AUTOMATIC OPERATION DRY Operation Switch on the power and the OPERATION indication lamp on the 1. Push the MODE button to select DRY. display panel of the indoor unit starts flashing, and turns off after 2. Push the TEMP button to set the desired temperature within flashes for 6 times.