Advertisement
Remote Controller Specification
Model
RG51M5/(C)EU, RG51M1/EU1
Rated Voltage
3.0V(Dry batteries Lr03 2)
Transmission Distance
8m
O
O
Environment
23 F~140 F
Performance Features
1. Operating Mode: AUTO COOL
DRY
HEAT(Cooling only model without) and FAN .
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range:
O
62 F~ 86 F
4. Full function of LCD (Liquid Crystal Display)
Features of Remote controller buttons
SET TEMPERATURE( F)
O
FAN
AUTO
HIGH
COOL
MED
DRY
LOW
HEAT
TEMP
1
MODE
ON/OFF
FAN SPEED
3
TIMER ON
SWING
SLEEP
4
FP
TIMER OFF
5
RESET LOCK
AIR
LED
DIRECTION
DISPLAY TURBO
6
7
Fig. 1
NOTE: FP button is available for Model RG51M1/EU1
only.
1
TEMP Button
1
temperature setting in 1 F increments to 62 F.
TEMP Button
2
temperature setting in 1 F increments to 86 F.
NOTE: Press and hold
alternate the temperature display between the C & F scale.
MODE Selection Button: Each time the button is pressed,
3
the operation mode is shifted in the direction of the arrow:
AUTO
NOTE Please do not select HEAT mode if the machine you
purchased is cooling only type. Heat mode is not supported by
the cooling only appliance.
4
SWING Button: Push this switch button to activate auto
O
swing feature of the horizontal louver. Push it again to stop.
FP Button: During the heating operation(only when the
5
setting mode is HEAT), press this button and the unit will
operate at high fan speed with the temperature automatically
set to 8 C/46 F. The display window of indoor unit will display
FP . Press the buttons of ON/OFF, MODE, FAN SPEED,
TEMP UP/DOWN, TIMER ON/OFF, SLEEP or FP while
operating will cancel the FP function.
AIR DIRECTION Button: Used to change the louver
6
movement and set the desired up/down air flow direction.
The louver changes 6 in angle for each press.
RESET Button: When you press the recessed RESET button,
7
all current settings are cancelled and the control will return to
the initial settings.
2
8
FAN SPEED Button: Used to select the Fan Speed in four steps-
9
AUTO LOW
the fan speed mode is shifted.
8
ON/OFF Button: Push this button to start operation, push
9
10
the button again to stop operation.
11
TIMER ON Button: Press this button to initiate the auto-on time
10
12
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10h, each
13
press will increase the auto-timed setting 60 minutes increments.
14
To cancel the auto-timed program, simply adjust the auto-on time
to 0.0.
15
SLEEP Button: Press this button to go into the Energy-Saving
11
operation mode. Press it again to cancel. This function is only
can be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
NOTE: While the unit is running under SLEEP operation mode, it would
be canceled if you press the MODE,FAN SPEED or ON/OFF button.
: Push this button to decrease the indoor
o
O
: Push this button to increase the indoor
o
O
and
buttons together for 3 seconds will
O
O
COOL
DRY
HEAT
FAN
O
O
O
MED or HIGH. Each time the button is pressed,
2
Advertisement
