Table of Contents
Advertisement
4.
Track no. 1 will playback automatically after it finishes reading the CD disc contents.
5.
Press FF /
or FR /
6.
Press and hold FF /
7.
Press STOP /
to stop playback.
8.
Press CD OPEN / CLOSE /
CD-MP3 disc playback
1.
Press the FUNCTION /
2.
Insert CD-MP3 format disc. Press CD OPEN / CLOSE /
the compartment. READ is displayed as the CD player scans the contents
of a disc.
3.
Track no. 1 of root folder (Folder 1) will playback automatically after it
finishes reading the CD-MP3 disc contents.
4.
Press FF /
or FR /
appears in the display.
5.
Press and hold FF /
6.
Press PRESET + /
7.
Press STOP /
to stop playback.
PROGRAMMING TRACKS
You may store up to 20 tracks in the desired sequence.
1.
When the CD player is stopped, press PROGRAM /
MEMORY and P0-01 start flashing on the screen.
2.
Press FF /
or FR /
appears in the display.
•
For MP3: press PRESET + /
3.
Press PROGRAM /
next position.
4.
Repeat steps 2 and 3 to select and store all desired tracks. FULL is displayed if
you attempt to program more than 20 tracks.
5.
Press PLAY/PAUSE to play the program.
Erasing the program
You can erase the contents of the memory by:
•
Pressing STOP /
•
Press POWER /
•
Select another sound source
•
Open the CD door
OPERATION
once or repeatedly until the desired track number appears in the display.
or FR /
to move within the track currently playing.
to open the CD compartment to remove/change the disc.
to set the unit to CD mode.
once or repeatedly until the desired track number
or FR /
to move within the track currently playing.
or PRESET – /
to select the desired album.
once or repeatedly until the desired track number
or PRESET – /
to confirm, display shows stored track no. and
once if player is stopped, or twice during playback;
again to close
to start programming.
to select the desired album.
- 16 -
Advertisement
Table of Contents
