Table of Contents
Advertisement
Using earphones (not included)
For private listening, plug your earphones into the
EARPHONE INPUT on the front panel of the jukebox.
The speakers will be disconnected when headphones
are plugged in.
Charging your USB device
To charge your USB device, pull down the front panel as
shown on the diagram to the right. Connect your USB device
to the Charging Port. You can use the shelf as a stand to
support your USB device while is it charging.
The USB CHARGING PORT ONLY CHARGES your USB device
when BATTERY IS LOW. Do not charge your device if
battery is completely depleted.
Using external speakers (not included)
With your new jukebox, you have the option of adding external speakers. The SPEAKER OUTPUTS for
external speakers are located on the back of the radio. Along with the speaker outputs, there is a switch
labeled INT./EXT. When using EXTERNAL SPEAKERS, the switch must be switched to the EXT. position. This
turns off the internal speakers in the radio and redirects the power to the external speakers. If you decide
not to use the external speakers, be sure the switch is set to INT.
USB & SD-CARD OPERATION
USB operation
1.
Press the FUNCTION /
2.
Plug-in the USB storage device in the USB INPUT on the Control Panel. READ is displayed as the system
scans the contents of USB device.
3.
Track no. 1 of root folder (Folder 1) will playback automatically after finish
reading USB device contents.
4.
Press FF /
or FR /
appears in the display.
5.
Press and hold FF /
6.
Press PRESET + /
7.
Press STOP / to stop playback.
The USB INPUT is ONLY for PLAYBACK & RECORD using your USB device.
OPERATION
button to set the unit to USB mode.
once or repeatedly until the desired track number
or FR /
to move within the track currently playing.
or PRESET – /
to select desired album.
- 14 -
EARPHONE
INPUT
USB CHARGING
PORT
Advertisement
Table of Contents
