OPERATOR’S MANUAL CAUTION 1. Don’t put the AC plug into the wall outlet until the fan has been completely assembled. 2. Use power supply of the fan according to the electric nameplate at the back of switch box. 3. Don’t insert fingers or other objects through the guards when the fan is working.
ASSEMBLY AND OPERATION Rear Guard Assembly Pull out the fan body from the box. Remove the plastic guard nut from the motor shaft. Then insert the rear guard into the front side of the motor shaft. Make sure that the central holes on the guard must fit the plastic pins around the shaft.
MAINTENANCE 1. Use wet cloth with detergent or dry cloth to wipe the fan. 2. Don’t swill be fan with water. 3. Never open the cover during cleaning. No user serviceable parts inside. 4. Cover it with a plastic bag, and lay it in dry place or box. 5.
Page 5
AKAI ELECTRIC CO.,LTD. JAPAN www.akai.com...