You Will Also Need - 3DR Quad Frame Kit Instructions Manual

CO NT E NTS
30 mm threaded spacers (4)
18 mm threaded spacers (12)
8 mm threaded spacers (4)
5 mm steel bolts (24)
5 mm nylon bolts (8)
Metal lock washers (8)
Metal nuts (16)
Nylon nuts (4)
Rubber washers (4)
Zip ties (8)
Deans to XT60 adapter
XT60 connector - male
Battery strap
Heat shrink tubing

You will also need:

Frame:
» Phillips screwdriver (small)
» 5.5 mm (7/32) wrench
» 2 mm (5/64) hex wrench
» Blue threadlocking compound
Electronics:
» Double-sided foam mounting tape
» Soldering equipment
These instructions show the complete assembly and wiring process for a 3DR Quad
using 3DR electronics. For assembling your Quad Frame Kit using other electronic
components, please adjust these instructions accordingly.
30 mm steel bolts (4)
25 mm steel bolts (12)
Black arm (3)
Blue arm (2)
Your 3DR Quad Frame
Kit contains:
Bottom plate
APM plate Accessory
plate (2)
Power distribution board
Five-wire RC receiver cable
Two-wire RC receiver cable
Deans connectors - male (4)
These instructions require some minor
soldering. If you're unfamiliar with
soldering, our friends at Sparkfun have
some great tutorials that can get you
started, including this comic:
learn.sparkfun.com/curriculum/42.
For an example of exactly what you'll
be doing for this assembly (soldering
Deans connectors to ESCs), check out
this video: youtu.be/3LJIQeKuLLU.
Top plate
Landing gear
pieces (8)
1