Table of Contents
Advertisement
S E CU RE W IRING
Before flying use zip ties to secure ESCs to the frame. Ensure that all wires are secured
so they will not become entangled in spinning propellers, are not too tight around corners
(no hard 90-180 degree bends), and do not pull on APM or other components. Always
complete the pre-flight checklist before takeoff (copter.ardupilot.com/wiki/checklist).
ESCs and wiring
secured with zip ties
Visit
copter.ardupilot.com
hardware and software configuration, using autonomous flight
modes, tuning, designing missions with waypoints and events,
troubleshooting, and more. Happy flying!
A DD -ONS
3DR Radio Telemetry Kit
915 Mhz (US)
$85.99
3DR Video/OSD Kit
$189.99
MB1240 MaxSonar-EZ4
Ultrasonic Range Finder
$39.95
to learn about multicopter safety,
Available at
Store.3DRobotics.com
Spektrum DX8 8CH
Transmitter
$429.99
11
Advertisement
Table of Contents
