Getting Started - Adaptive Sound ASM1002 ASTI Owner's Manual

Getting Started

Unpack
the box which contains:
1. Adaptive Sound
2. Power Supply
3. User Manual (this document)
Connect Power
The power jack is located on the bottom of the Adaptive Sound
Sleep Therapy System. Push the power supply plug into the jack.
Slip the cord under the rubber foot by separating the two pieces of
the feet along the slit. The machine should sit flat on a table or
nightstand if the cord is installed correctly. Next, connect the AC
plug into an un-switched wall outlet. The system may take up to 20
seconds to initialize. Please note the ten orange dots around the
Dial to not light up.
Turn on the Sleep Therapy System
button. The unit will start playing immediately. The unit may be
turned Off with the Power button, or the Sleep Timer button (see
page 6).
Note: Out of the box, the unit starts in Adaptive mode with full
Richness. (These are explained in the next section.) After that, the
unit will retain the last settings used when you last powered it off.
Rotate the Dial
with the Up/Down buttons.
Power
On/Off
SoundStories
TM
Sleep System
to select a SoundStory, and adjust the Volume
POWER DISPLAY
TIMER
30 60 90 120
TRAIN
MEADOW
OCEAN
FIREPLACE
WATERFALL
ADAPTIVE
4
Press the Power
VOLUME
+
–
CITY
RAINFALL
BROOK
MEDITATION
WHITE NOISE
RICHNESS
Volume
Up
Down