Page 2
If you have any suggestions on how we can make our products better please let us know. Sam J. Nicolino Jr. Adaptive Sound Technologies, Inc. President and CEO 1-408-377-3411 feedback@soundofsleep.com http://www.soundofsleep.com/ Write down your Serial Number: Record your serial number here.
Contents Getting Started..............4 What is Special About this Machine?......5 Adaptive Mode ................5 Richness..................5 Using Richness and Adaptive Features ........6 Useful Features..............6 Sleep Timer ................6 Display On/Off ................7 Headphones ................7 SoundStories Special Cases............7 Technical Information............8 Specifications ................8 How to Restore the Factory Settings .........8 Trouble Shooting ................8 Customer Support ..............8...
User Manual (this document) Connect Power The power jack is located on the bottom of the Adaptive Sound Sleep Therapy System. Push the power supply plug into the jack. Slip the cord under the rubber foot by separating the two pieces of the feet along the slit.
What is Special About this Machine? Adaptive Mode Richness Level On/Off (press to select) ADAPTIVE RICHNESS 2 lights: High Light means 1 light: Medium Adaptive is On No lights: Low Adaptive Mode The Sleep Therapy System can adapt to noise in your room. It has a microphone that listens for disruptive noises and raises the volume and/or adds enhancing sounds (richness) to the SoundStory.
Using Richness and Adaptive Features The Richness and Adaptive buttons allow the unit to be customized to suit each personal preference and situation. You might prefer a quiet, steady sound and may not use the Adaptive feature, especially if there is little noise, or steady noise, in your environment. Or, you might need the masking that Adaptive provides, or prefer a more lively sound created by the higher levels of Richness.
Display On/Off When the unit is On, the Display button turns the front panel lights On/Off. The exception is the Power button: if unit is On, the Power button turns off the unit and all the panel lights. Note: If the display is Off and any setting is changed, the lights will come back on for 15 seconds and then go off again.
3) Continue to hold power button down for 5 seconds. 4) Repeat 1-3 up to three more times if unit does not turn on. Customer Support If you have problems or questions, please contact Adaptive Sound Technologies, Inc. 1-408-377-3411 (support@soundofsleep.com)
Safety, Warranty, and Certifications Safety Instructions Read and adhere to all safety and operating instructions before use. Keep this booklet for future reference. The unit should be cleaned regularly with a soft, dry cloth. The grill may be vacuumed to remove excessive dust or particle build-up.
One Year Limited Warranty Adaptive Sound Technologies, Inc., hereinafter referred to as ASTI, warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a defect...
ADAPTIVE SOUND TECHNOLOGIES, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ASTI DISCLAIMS ANY AND ALL STATUTORY...
Need help?
Do you have a question about the ASM1002 ASTI and is the answer not in the manual?
Questions and answers