Advertisement
Configuring the Home Gateway Internet Modem
with the ISP User ID and Password
Step
1:
Make sure that you have your user ID and password available before you start connection
procedures. Connect the LAN cable included with the HGW modem to the LAN port on your computer.
You can connect to any of the four LAN ports on the back on the HGW modem. The modem can be used
as a wireless Router. The modem Wi-Fi passcode is the MAC address located on the seal on the back of the
modem.
Wi-Fi Passcode
Direct Connect
afdc1e5595cae
Note: The below lamps on the Modem indicates a normal active status.
Advertisement
