Zero 88 Solution Quick Start Manual page 25

DeskSetup
Desk Setup
The Desk Setup function allows you to configure or customise the settings on the desk to your own requirements.
Desk Setup is divided into a number of different sections which are accessed by pressing the corresponding MFK
or soft button on the monitor.
A summary of the Desk Setup options is provided below. For further details of the various options refer to the Setup
chapter in the full User Manual.
• Displays – Adjust the brightness and contrast of the Main LCD and other LCDs on the front panel; calibration of
external touch screen monitor; screen timeout.
• Peripheral - Allow mouse or trackball to control pan and tilt parameters; adjust control wheel sensitivity.
• Inputs – Set up SMPTE and MIDI Timecode; Set CAN mode; MIDI Notes; Configure Remote Switches.
• Outputs – Map DMX universe to the physical DMX outputs on the desk.
• Behaviour – Confirm Overwrites; Recovery Mode; Preset Mixing; Keep Parameters Separate options.
• Memory Defaults – Set up the default delay and fade times for each attribute (Intensity, Colour, Beamshape,
Position); Move on Dark parameters.
• Submaster Defaults – Set up default options for flash button action, trigger level and attribute fade times.
• Set Date – Set the date on the desk.
• Set Time – Set the time on the desk.
Figure 21 - Desk Setup
23