Pattern - Qvis APOLLO-KEYBOARD1 User Manual

c) Input a value at the tour No.
d) Add preset to the tour.

Select preset No. and then input a preset number.
 Select preset add and then click 【ENTER】 to confirm. Now the preset is added to the
tour.
4.3.6.2 Tour
Select tour and then input tour number.

Select start and then click 【ENTER】, system begins tour.

Select stop and then click 【ENTER】,system stops tour.

Select delete and then click 【ENTER】, system removes the tour.

4.3.7 Pattern

4.3.7.1 Pattern
a) On the keyboard click 【PATTERN】, the interface is shown as below. See Figure 4-9.
b) Select tour number and then input a value.
c) Select tour set button and then click 【ENTER】 button.
d) Use joystick to set pattern and then click 【ENTER】 to end. The speed dome can
memorize your whole operation.
4.3.7.2 Start pattern
Select tour No. and then input a tour number, select start and then click 【ENTER】 button,
system begins pattern operation.
4.3.7.3 Stop pattern
Select tour No. and then input a tour number, select stop and then click 【ENTER】 button,
system stops pattern operation.
Figure 4-8
Figure 4-9
21