Table of Contents
Advertisement
HOOK-UP GUIDE - STANDALONE APPLICATIONS
Surge Module Installation
The Surge Module features patented Monster Clean Power Stage 1 v.2.a to reduce interference coming through
the AC power line to your components and provides surge protection against damaging voltage surges and spikes.
A) Strip about a half inch of insulation off the ends of the line (Black), neutral (White), and ground (Green)
input wires extending through the two gang outlet box.
B) Attach each wire from the outlet box to the corresponding wires on the In-Wall PowerCenter with
the included wire nuts. NOTE: The input wires are multi-stranded.
C) Strip about a half inch of insulation off the ends of the solid copper output wires on the Surge Module.
(See the next page for the outlet receptacle installation.) ,
Advertisement
Table of Contents
