Using The Lcd Monitor - Canon PowerShot S230 DIGITAL ELPH Connection Manual

Using the LCD Monitor

The LCD monitor can be used to compose images while shooting,
adjust settings menus and replay images.
• The image in the LCD monitor will darken in strong sunlight
or bright light. This does not constitute a malfunction.
Shooting Mode
Standard (No Information)
• The LCD monitor setting (On or Off) is saved by the camera
when the power is turned off so that the same setting is
automatically available when the power is turned on again.
However, the setting may be lost when the power has been
turned off after the "Change the battery pack" message has
displayed, while the LCD monitor was on in shooting mode.
• In the
regardless of its On/Off setting.
• Set the flash to
the upper indicator blinks orange and the camera shake
warning icon ( ) appears in the LCD monitor after the
metering preparations are complete.
Notice Concerning Shooting
When using this camera to shoot scenes containing extremely bright subjects, a
vertical, red bar of light may appear on the LCD monitor. This is a normal
occurrence in devices containing CCDs and does not constitute a malfunction.
This red bar of light will not be recorded when shooting still photos, but it will
be recorded when shooting movies.
( or on the mode switch)
• The LCD monitor turns on or changes
the display mode as follows with each
press of the
Detailed (Information View)
, or mode, the LCD monitor turns on
, or affix the camera to a tripod when
Basic Functions
button.
29
Off