Canon PowerShot S230 DIGITAL ELPH Connection Manual page 197

• Power-Saving Function
This camera is equipped with a power-saving function. The
power will automatically shut down under the following
circumstances when this function is set to On. Press the ON/
OFF Button to restore power.
Shooting Mode
Powers down approximately 3 minutes after the last
control is accessed on the camera. (The LCD monitor
automatically turns off 3 minutes after the last control is
accessed even if this function is set to Off. Press any
button except the ON / OFF Button to turn the LCD
monitor back on.)
Replay Mode
Powers down approximately 5 minutes after the last
control is accessed on the camera.
Connected to a Printer (optional)
Powers down approximately 5 minutes after the last
control is accessed on the camera or something is
printed on a connected printer.
Connected to a Computer
A warning message displays on the computer screen
approximately 5 minutes after the last control is
accessed. Powers down approximately 1 minute later if
no control is accessed.
• The power-saving function will not activate while
the Communication mode is set to PTP (p. 116).
• The power-saving function will not activate during a
slide show.
• The camera's settings can be changed to turn off the
power-saving function (p. 123).
Basic Functions
27