Wax Guard Replacement - Panasonic WH-416KZ Operating Instructions Manual

Wax Guard Replacement

If your ear feels that sounds are muffled or the sound volume is too low, the wax guard might be clogged.
The clogged wax guard may obstruct the sound or affect the sound quality. Replace it with a new one.
The wax guard is attached to the head of the receiver.
Replacement
tool
For removal (+)
A
For fixing (-)
B
· Do not use the wax guard for any other types of receiver units.
28
1 2
Receiver
Wax guard
Insert a new Insert the wax
wax guard into guard currently
the "B" side of used into the
the tool. "A" side of the
tool.
(Be sure to ask your dispenser)
3 4
Pull out the Push the new wax
tool, so the wax guard (fixed at step
guard will be No.1) down into
removed from the head of the
the receiver. receiver in place.
5
Pull out the tool,
so the new wax
guard is held in
place securely
into the head of
the receiver.