Advertisement
player. Next, choose your input device by pressing the "Enter"
key on your remote which will display a page listing the folders
and/or picture files in your selected device.
4. After selecting the picture, press "enter" to display. You can then
press the OSD key on your remote to display a list of picture
options. There are 3 options: "Switch Mode", "Play Interval" and
"Background Music".
a. For "Switch Mode" Press the up and down arrow keys to view
all the different modes of switch available for switching your
pictures, and then select one by pressing the "enter" key on
the remote. The modes available are : "Default" "Persian
Blinds H" "Persian Blinds V" "Slide up" Slide down" "Slide left"
"Slide right" "Stretch up" "Stretch down" "Stretch left" "Stretch
right" "Mosaic" "Zoom in" "Zoom out".
b. For "Play Interval", Press the up and down arrow keys to view
the interval of switching your pictures, and then select one by
pressing the "Enter" key on your remote. You have the
following interval choices: 1s, 3s, 5s, 10s, and 30s.
c. For "Background Music", press up and down keys to choose
background music on or off.
File
1. Use the arrow keys to select "File" on the main menu, and press
"Enter" key to enter.
2. After entering, use the arrow keys to select the required input
device. Press the "Enter" key to enter.
3. After choosing the device, you will see all available files.
FRONT PANEL CONTROLS FOR THE DT-HDMP-2
Advertisement
