Introduction - GeoVision GV-Keyboard V3 User Manual

Introduction

The GV-Keyboard V3 is designed to program and operate GV-System / GV-Control Center,
and it can also be connected with PTZ cameras directly for PTZ control.
Key Features:
•
A Keyboard can control up to 16 GV-Systems / 16 GV-Control Centers.
•
Multiple Keyboards can work with up to 8 monitors for Digital Matrix, TV Quad and Spot
Monitor applications in GV-System.
•
Multiple Keyboards can work with up to 8 monitors for Matrix View and ViewLog
applications in GV-Control Center.
•
A Keyboard can directly set up and control up to 32 PTZ cameras.
GV-System:
If you use the Keyboard with GV-System, see Chapter 1 for detailed installation and
operations.
GV-Control Center:
If you use the Keyboard with GV-Control Center, see Chapter 2 for detailed installation and
operations.
PTZ Cameras:
If you use the Keyboard to directly control PTZ cameras, see Chapter 3 for detailed
installation and operations.
Important:
1. The Keyboard for GV-System and for GV-Control Center has a different button
design.
2. The Keyboard is protected with a password. Every time when you use the Keyboard,
you will need to enter the default password "0000" to unlock it. To change the default
password and set the auto lock time, see Chapter 6 Basic Programming and Operation.
3. To see the list of PTZ camera protocol supported by the Keyboard for direct control,
see Supported PTZ Protocols and Brands, Appendix.
Introduction
3