Stand Assembly; Attaching The Base - Philips 50PFL3708 User Manual

Stand assembly
i!ii!_!l @_i_i ¸
1
2
3
Attaching the base
You must attach the base to the unit to have it as a table top unit,
Be sure the front and rear of the base match the proper direction,
For large screen TVs, at least 2 people are required for these steps.
1
1
2
2
Note
• Make sure to use a table which can support the weight of this unit and is lar£er than
this unit,
• Mal<e sure the table is in a stable location,
• When attaching the base, ensure that "FRON] " with "arrow" written on the bottom
of the base is downward. If it's not downward, the 2 hooks don't fit into the base.
• When a_aching the base, ensure that all screws are tightly fdsSened. If the base is not
properly attached, it could cause the unit to full, resulting in injuries as well as damage
to the unit.
• Io remove the base fi_om this unit unscrew the Phillips head screws in step 2.
Be careful not to drop the base when you remove it.