Rear View - Danita 2000MULTI User Manual

Rear View

13
12. ANTENNA
UHF / PL connector. Connect an antenna specially designed for 27 MHz
here. The antenna and cable should be of 50 Ohm's impedance.
13. EXT.
An external loudspeaker of 8 Ohm's impedance can be connected to this
3.5 mm jack.
When the plug is connected, the build in speaker is automatically
disconnected.
14. 13.8V DC
12-15 Volt DC should be connected to negative (black cable) and positive
(red cable).
Notification
danita electronics a/s hereby declare that danita 2000Multi complies with
the essential requirements in the Directive 1999/5/EC.
The original EU declaration can be seen at www.danita.eu , English page,
CB radios, Technique.
May be used in:
AT, BE, BG, CH, CZ, DE, DK, EE, FI, FR, GB, HU, IE, IS, IT, LT, LU,
LV, NL, NO, PL, PT, RO, SE, SI og SK.
14 12
5