Danita SP3380 Operation Manual

Advertisement

Danita SP3380 Operation manual
CE (!)
( PMR 446 )
danita SP3380 PMR446 is a high quality product, designed for long lasting and dependable service.
To get full benefit from it, please follow the instructions in this manual carefully.
NOTE
danita SP3380 is tested according to Directive 1999/5/EC and may therefore be used in most of the
European countries.

FOR YOUR SAFETY

For your safety and protection please ensure that you use danita SP3380 as described in this manual.
The danita SP3380 must not be used in ways that could hurt you or others.

SERVICE

If your transceiver does not work properly, first check that all settings are as described in this manual.
If this does not resolve the situation, do not attempt to fix the transceiver yourself, but take the unit to
your dealer. Please enclose a short description of the fault.
HOW TO USE DANITA SP3380
Select a channel and set the volume control to about medium. Hold danita SP3380 about 2" from your
mouth, press the PTT, speak in a normal voice into the microphone, release the PTT and adjust the
volume when the other party answers you.

CONTROLS AND INFORMATIONS

1. Antenna
2. LCD screen. Displays current channel selection and other radio status symbols.
3. UP button. (Volume/channel) Press to adjust volume level and change channels.
4. DOWN button. (Volume/channel) Press to adjust volume level and change channels.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP3380 and is the answer not in the manual?

Questions and answers

Summary of Contents for Danita SP3380

  • Page 1 HOW TO USE DANITA SP3380 Select a channel and set the volume control to about medium. Hold danita SP3380 about 2” from your mouth, press the PTT, speak in a normal voice into the microphone, release the PTT and adjust the volume when the other party answers you.
  • Page 2 5. C Call. Press to transmit calling tone. Used for MENU choice and to turn the LCD screen lamp ON / OFF (Lamp will 6. Enter. automatically shut down after 4 seconds if no other buttons have been pressed). When pressed for 3 seconds a KEY icon shows on the display and the volume and channel operations are disabled.
  • Page 3 MENU. 1 press. Channel number is flashing. The desired channel is selected with the channel selector push buttons. Press Enter (6). 2 press. SCAN flashing. Press UP or DOWN buttons (3 or 4) to start scanning the 8 channels, SCAN icon is displayed.

Table of Contents