Reliability Compliance And Recommended Standards; Reliability Compliance; Applicable Standards Listing - US Robotics Courier USR3500 Reference Manual

8. Reliability Compliance and
Recommended Standards
8.1.

Reliability Compliance

The USR3500 is compliant with the following requirements.
Table 36. Standards Conformity for the modem
Abbreviation Definition
IEC International Electro technical Commission
ISO International Organization for Standardization
8.2.

Applicable Standards Listing

The table hereafter gives the basic list of standards applicable to the USR3500.
Note: References to any features can be found from these standards.
Table 37. Applicable Standards and Requirements for the modem
Current
Document
Version
IEC6006826 7.0
IEC60068234 73
IEC60068264 2.0
IEC60068232 2.0
IEC60068231 2.0
IEC60068229 2.0
IEC60068227 4.0
IEC60068214 6.0
IEC6006822 5.0
IEC6006821 6.0
IEC60068230 3.0
IEC6006823 69 w/A1
IEC60068278 1.0
Title
Environmental testing - Part 2.6: Test FC: Sinusoidal Vibration.
Basic environmental testing procedures part 2: Test FD: random vibration
wide band - general requirements.
Cancelled and replaced by IEC60068-2-64. For reference only.
Environmental testing - part 2-64: Test FH: vibration, broadband random and
guidance.
Basic environmental testing procedures - part 2: Test ED: (procedure 1)
Withdrawn & replaced by IEC60068-2-31. For reference only.
Environmental testing part 2-31: Test EC: rough handling shocks, primarily
for equipment-type specimens.
Basic environmental testing procedures - part 2: Test EB and guidance:
bump.
Withdrawn and replaced by IEC60068-2-27. For reference only.
Environmental testing - part 2-27: Test EA and guidance: shock.
Environmental testing - part 2-14: Test N: change of temperature.
Environmental testing - part 2-2: Test B: dry heat.
Environmental testing - part 2-1: Test A: cold.
Environmental testing - part 2-30: Test DB: damp heat, cyclic (12 h + 12 h
cycle).
Basic environmental testing procedures part 2: Test CA: damp heat, steady
State.
Withdrawn and replaced by IEC60068-2-78. For reference only.
Environmental testing part 2-78: Test CAB: damp heat, steady state.
Rev 1.0 1/27/14 50