Arrangement - Dukane 8958A User Manual

Arrangement

Refer to the tables T-1 and T-2 at the back of this manual as well as the following
to determine the screen size and projection distance. The values shown in the
table are calculated for a full size screen.
× : Screen size
: Projection distance
(from the projector's end)
, : Screen height, when
the vertical lens shift
is set full upward.
• If the projector is used at an altitude of about 1200 m (3937 feet) or higher, set ALTITUDE
of the SERVICE item in the OPTION menu to HIGH. Otherwise, set it to NORMAL.
If the projector is used with a wrong setting, it may cause damage to the projector itself or
the parts inside.
WARNING ►Install the projector where you can access the power outlet
easily.
►Install the projector in a stable horizontal position.
• Do not use any mounting accessories except the accessories specifi ed by the
manufacturer. Read and keep the manuals of the accessories used.
• For special installation such as ceiling mounting, be sure to consult your dealer
beforehand. Specifi c mounting accessories and services may be required.
• Do not put the projector on its side, front or rear position.
• Do not attach nor place anything on the projector unless otherwise specifi ed
in the manual.
►Do not install the projector near thermally conductive or fl ammable things.
►Do not place the projector where any oils, such as cooking or machine oil, are
used.
►Do not place the projector in a place where it may get wet.
CAUTION ►Place the projector in a cool place with suffi cient ventilation.
• Keep a space of 30 cm or more between a side of the projector and other
objects such as walls.
• Do not stop up, block nor cover the projector's vent holes.
• Do not place the projector at places that are exposed to magnetic fi elds, doing
so can cause the cooling fans inside the projector to malfunction.
►Avoid placing the projector in smoky, humid or dusty place.
• Do not place the projector near humidifi ers.
NOTICE ►Position the projector to prevent light from directly hitting the
projector's remote sensor.
►Do not place the product in a place where radio interference may be caused.
►Check and correct the setting for
menu according to the usage environment. For details, see User's Manual -
Operating Guide.
6
of SERVICE in the OPTION
ALTITUDE
Projector top
Projector bottom