Table of Contents

Advertisement

PAIRING

Please make sure your phone is Bluetooth-enabled before you start the pairing process.
Follow your phone instructions. Place the phone and headset together (less than 1 meter)
for smooth pairing.
Pairing with One Phone
1. Turn on both the headset and the phone.
2. Hold the headset's MFB for 8 seconds until its blue and red indicator light flashes
alternately, which means the headset is entering pairing mode.
3. Activate Bluetooth function of the cell-phone to get into search mode and search for
Bluetooth devices (please refer to your phone's manual for more instruction).
4. Select "WYZER
" among the found devices list, then confirm according to phone
5
instructions.
5. Input pin code "0000" to confirm and finish pairing. When the headset's blue indicator
light flashes, it means the headset and mobile phone have completed the pairing and
are now connected.
Pairing with Two Phones
Bluetooth headset WYZER
simultaneously.
1. Pair the first phone by following the "Pairing with one phone" steps stated above.
2. Turn off the first connected phone's Bluetooth function temporarily.
3. Repeat steps you used to pair the first phone to finish pairing with the second phone.
4. After successful pairing, you can reach the dual-link function in two ways:
I. After pairing with the second phone, hold the headset's MFB for 2 seconds and
then release. Meanwhile, activate the first paired phone's Bluetooth function and
choose "WYZER
II. After pairing with the second phone, turn off the headset. Then power on the
first paired phone's Bluetooth function, and restart the headset. The headset will
connect to both paired phones automatically.
N
.
OTE
While the headset is connected with two mobile phones, if the headset is used to
make calls with one of them, the headset will temporarily disconnect from the other one
automatically, and reconnect after the call ends.
The headset's dual-link function is also dependent on hand-set capabilities and may not be
compatible with certain phone brands or models.
has a dual-link function for connection with two mobile phones
5
" in its paired Bluetooth devices list to complete connection.
5
4

Advertisement

Table of Contents
loading

Table of Contents