Table of Contents
Advertisement
CHARGING
1. Please fully charge the headset before using.
2. While in use or in standby state, please charge the headset if you
hear 1 alert tone every 10 seconds, along with red indicator light
flashing every 5 seconds.
3. When the charger is plugged in, the red indicator light flashes twice and
then shine steadily, meaning the headset has entered charging state. When
the charging is complete, the red light turns blue
T
.
The headset can be charged via:
IP
a. Computer with its original USB charging cable plugged into computer's
USB port;
b. Wall plug with the USB cable into the wall charger.
N
.
OTE
After fully charged, the battery offers:
Talk time: approximately 3.5 hours
Standby time: 85 hours
Battery life may vary depending on your phone settings and your usage pattern.
C
.
Do not charge the headset with non-original charger or charging cable. Any
AUTION
damage caused by non-Wyzer accessories will void the warranty.
USE
1. The headset is fit for wearing on either ear. Simply adjust the ear
loop direction as shown in the diagram.
2. Firmly put the speaker into your ear.
3. Rotate the ear loop to turn the microphone in
the direction of your mouth.
POWERING ON/OFF
Powering ON
1. Press and hold WYZER
2. Release as soon as the indicator lights (both blue and red) shine for 1 second. Now the
headset has been turned on along with an indication tone and the flashing indicator
light turns red.
N
.
When the headset has not been connected to any Bluetooth devices, only the red
OTE
indicator light flashes.
Powering OFF
1. When the headset is ON, press and hold its MFB for about 5 seconds.
2. Release the button when its indicator lights (both blue and red) shine for 1 second and
then disappear along with indication tone. Now the headset has been turned off.
MFB for about 5 seconds.
5
3
Advertisement
Table of Contents
