Changing The Water Filter - Samsung RF31FM Series User Manual

Cooling - North American (US, Canada) Models
Off Mode Only ;
Cooling Off mode (also called Shop
mode), is designed for use by retailers
when they are displaying refrigerators on
the shop floor. In Cooling Off mode, the
refrigerator's fan motor and lights work
normally, but the compressors do not run,
and the refrigerator and freezer do not get
cold. To start Cooling Off mode, touch
and hold the Energy Saver button and
the Freezer button for 5 seconds during
normal operation. The refrigerator chime
sounds and the temperature display
flashes OFF.
To cancel Cooling Off mode, touch and
hold the Energy Saver and the Freezer
buttons again for 5 seconds.
CHANGING THE WATER
FILTER
To reduce the risk water damage to your
property DO NOT use generic brands of
WARNING
water filters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND
WATER FILTERS. SAMSUNG is not
legally responsible for any damage,
including, but not limited to, property
damage caused by water leakage
from the use of a generic water fi lter. SAMSUNG
Refrigerators are designed to work ONLY WITH
SAMSUNG Water Filters.
The Filter light turns red to let you know when it is
time to change your water fi lter cartridge.
To give you time to get a new fi lter, the red light
comes on just before the capacity of the current
fi lter runs out. Changing the fi lter on time provides
you with the freshest, cleanest water from your
refrigerator.
To change the water filter, follow these steps:
1. Shut off the water supply. Then, turn the water
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
• To change the water filter more easily,
shut off the water supply valve.
26_ operating
DA68-02894A-10.indb 26 DA68-02894A-10.indb 26
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
to stick. If you are having difficulties, grip the
water filter firmly and pull it hard.
• When you pull the water filter, a little water
can leak from the opening. This is normal.
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
• To prevent overflow,
empty the water filter
tray ( 3 ) and dry
around the filter case
( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until
it locks.
• If you have trouble inserting the water
filter because of high water pressure,
shut off the water supply valve.
• The locked symbol should be lined up
with the indicator line.
(Red) (Red)
5. Touch the "Alarm/hold
3 sec for Filter Reset"
button (
(Filter Reset) (Filter Reset)
about 3 seconds to reset
the water filter. The color
of the indicator (
changes from red to off.
6. If you turned off the water supply, turn it back
on.
For a replacement water filter, you can visit
your local home Improvement center or
contact the Samsung Parts distributor.
To order more water filter cartridges,
contact your authorized Samsung dealer.
Be sure the replacement water filter has
2
the SAMSUNG logo on the box and on the
water filter.
1
Removing any residual matter inside
the water supply line after installing
the water fi lter.
1. Turn ON the main water supply and supply
2
3
4
) for
)
2014. 5. 13. 2014. 5. 13. 11:46 11:46