Table of Contents
Advertisement
Settings
WiFi
Tap on the WiFi panel and slide to On. This will enable you to
see the available networks.
When your router's SSID is hidden, tap on the plus symbol at
the top right corner. This will bring up the "Add network"
menu where you can insert your SSID and select the security
used by your router.
Select the network you wish to connect to. Private networks
are shown with a lock icon and will require you to enter your
password.
The WiFi connection is automatically disconnected when the
device enters sleep mode. It takes a minute or two for the
device to re-establish the WiFi connection after switching the
device back on.
To change this setting, select WiFi in the settings menu, tap on
the menu button in the top right-hand corner of the screen,
selected Advanced, and set the WiFi to be kept on during
sleep.
To modify an added network, tap and hold on the relevant
network, a new menu will appear that allows you to select
"Modify" or "Forget" the information that has previously been
stored about the network.
To scan for new networks, tap at the top right corner on the
menu button and select "scan".
The refresh symbol is used to setup a connection between your
router and the smartphone with pressing the "WPS" and/or a
button with the same symbol.
Bluetooth
Bluetooth allows you to connect to Bluetooth enabled devices.
Turn on your Bluetooth function by sliding the button to the
right.
30
Advertisement
Table of Contents
