Operation; Specifications; System And Outputs; Disc Features - Insignia NS-D160A14 User Manual

Operation

Problem Possible solution
Remote control does
• The remote control comes with the battery
not work
installed. A plastic sheet covers the battery to
protect it. Make sure that you remove the plastic
sheet. See
time" on page 7.
• Make sure that you are pointing the remote
control at the remote control sensor on the front of
your DVD player. See "Front" on page 5.
• Replace the dead battery with a new one. See
"Using the remote control for the first
page 7.
• Make sure that there are no obstructions between
the remote control and the remote control sensor
on the front of your DVD player.
• Make sure that there is no colored glass between
the remote control and remote control sensor on
the front of your DVD player. Colored glass, such as
the glass door of an entertainment center, can
interfere with signal reception.
• Make sure that the remote control sensor is not
exposed to direct sunlight or bright light. These
can interfere with signal reception.
appears on the
• This symbol means that an action is not permitted
screen
by the disc. For example, some DVDs do not let you
fast-forward through the legal warnings at the
beginning of the disc.
Playback does not start,
• Make sure the disc is face up in the disc tray.
or starts then stops
• Make sure that the disc is not dirty. See
when pressing PLAY
discs" on page
• Make sure the disc is not warped. Try another disc.
Some or all functions do
• Some functions are not allowed by the disc, for
not work
example, fast-forwarding through the warning
information at the beginning of the disc.
• Condensation may have formed inside your DVD
player. Turn off your DVD player and wait one to
two hours for the condensation to evaporate.
• Reset your DVD player. For instructions, see
"Resetting your DVD
When reading the disc,
• Make sure that the disc is not dirty. For
the disc tray opens
instructions, see
• The disc may be incompatible with your DVD
player. Try another disc.
• Reset your DVD player. For instructions, see
"Resetting your DVD
The DVD player freezes
• Make sure that the disc is not dirty. For
when reading a disc
instructions, see
• If your DVD player freezes again, the disc may
contain some content that is not compatible with
your DVD player. Do not try playing the disc with
your DVD player.
• Reset your DVD player. For instructions, see
"Resetting your DVD
DVD does not play
• Make sure the disc has the correct region code. The
DVD region code is "1" or "all."
No subtitles
• Turn on subtitles. See
page 12.
• Make sure the disc was recorded with subtitles. If
the disc has subtitles, a subtitle option should
appear in the disc's menu.
Resume function does
• If you press
not work
information is erased.
• Some discs do not support the resume function.
14
"Using the remote control for the first
time" on
"Cleaning
13.
player" on page 13.
"Cleaning discs" on page 13.
player" on page 13.
"Cleaning discs" on page 13.
player" on page 13.
"Language Setup menu" on
STOP twice, the resume
www.insigniaproducts.com

Specifications

Specifications are subject to change without notice.

System and outputs

TV signal system
Frequency response
S/N ratio
Audio
Audio output (analog)
Audio output (digital coaxial)
Video output
Component video
(Y, CB,CR)

Disc features

Tray vs. slot load
Disc capacity
Progressive scan
Skip protection
Optical disc support
Audio decoder
Digital audio output formats
supported via coaxial output
Digital audio decode capability
(digital coaxial output)
Video decoder

General

Power
Power consumption
Dimensions
H × D × W
Weight
Operating temperature
Operating humidity
Energy Star qualified
NS-D160A14 Insignia DVD Player
NTSC
CD:
• 20Hz-20KHz (EIAJ)
DVD:
• 20Hz-22KHz (96KHz) (Sample result)
• 20Hz-22KHz (48KHz) (Sample result)
> 65 dB
MPEG LAYER2 standard
Electrical level output:
• 2.0 ± 0.2 V
Resistance:
• 10K Ω
Electrical level output:
• 0.5Vp--p
Resistance:
• 75 Ω
Electrical level output:
• 1.0 ± 0.2 V
Resistance:
• 75 Ω Unbalanced negative
Electrical level output:
• 0.7Vp--p
Resistance:
• 75 Ω
Tray load
1
Yes
No audio skipping during CD playback under
typical usage conditions
Supports: CD Digital Audio 12 cm, CD-R,
CD-RW, DVD-Video 12 cm, DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-R DL Dual Layer,
DVD+R Dual Layer
Supports: CD Digital Audio, Dolby Digital
Supports: Linear PCM 2 channel, Dolby
Digital
Does not support: DTS, DTS HD Master Audio
Supports: Dolby Digital to 2-channel
downmix PCM
Does not support: DTS to 2-channel
downmix PCM
Supports: DVD Video, JPEG
Does not support: WMV (Window Media
Video) 9.1, VCD 1.1, VCD 2.0, SVCD, DivX, or
XviD
110V ~ 60Hz
11 W
1.67 × 10.63 × 7.95 inches
(42.5 × 270 × 202 mm)
2.09 lbs. (0.95 kg)
41°F to 95°F (5°C to 35°C)
5% to 90%
No