Installing Software - UTStarcom UM175CE User Manual

INSTALLING SOFTWARE

■ INSTALLING SOFTWARE
INSTALLATION
• If you install QuickLink Mobile, it will install the USB
Driver for the UM175CE. Follow the instructions from
QuickLink Mobile for installation.
WARNINGS!
• Make sure to complete the unplugging/ejection process
BEFORE removing the UM175CE. If you remove the device
improperly, it may be damaged. (For further informatin
on unplugging/ejection process, please refer to pages 54-
55.)
• Before inserting the UM175CE into your PC's USB port,
remove the Installation CD from the CD-ROM drive.
NOTES
• If you have inserted the device properly, Windows will
inform you of the new hardware. Wait until Windows
completes the "Found New Hardware" task. In Windows
XP, several tool tips similar to the "Found New Hardware"
function will appear and disappear in the system tray
automatically. In Windows Vista, several tool tips simi-
lar to the "Installing device driver software" function
will appear and disappear in the system tray automati-
cally. Once hardware detection is complete, you will be
prompted to start activation.
INSTALLING UM175CE INSTALLING UM175CE
41