Download  Print this page
   

Advertisement

BDSM400 QUICK START GUIDE
HOW TO:
Measure Room Dimensions:
1.) Use the "SET" key to set the datum to measure
from the "bottom" of the instrument.
2.) Tip the sonic transmitter to the forward (bent)
position.
3.) Move slide switch to distance measurement
position (far right).
4.) Turn the instrument on using the switch on the
rear.
5.) Place the unit against a wall - point at a clear
unobstructed opposite wall.
6.) Press either "read" button on the sides of the unit.
7.) The dimension will be displayed.
8.) Repeat for the opposite wall.
9.) To calculate area, press "X" after the first
measurement and "=" after the second.
Selecting the datum or measuring point.
"SET" Key
"SET" Key
Part No. 624046-01

Advertisement

   Also See for Black & Decker BDSM400

   Summary of Contents for Black & Decker BDSM400

  • Page 1 BDSM400 QUICK START GUIDE HOW TO: Measure Room Dimensions: 1.) Use the “SET” key to set the datum to measure from the “bottom” of the instrument. 2.) Tip the sonic transmitter to the forward (bent) position. 3.) Move slide switch to distance measurement position (far right).
  • Page 2 GUIDE DE DÉMARRAGE RAPIDE DU BDSM400 COMMENT : Mesurer les dimensions d’une pièce 1) Utilisez la touche « SET » pour établir le point de référence afin de prendre la mesure à partir du « bas » de l’appareil. 2) Faites basculer l’émetteur sonique vers l’avant.

Comments to this Manuals

Symbols: 0
Latest comments: