Advertisement
Quick Links
Operation Guide
Thank for your purchase of an A4 Thermal-Copier. This guide is for Series 'A4AU' models, indicated by
A4AU-0000 to A4AU-9999 serial numbers.
This guide introduces security advice, hints for installation and operation, as well as maintenance
information. Before using the machine, please read all areas of this guide to ensure correct set-up, care
and importantly to avoid risks for your health and/ or damage to the machine by improper use.
This symbol indicates an important hint for your safety.
Disregarding this subject may cause physical harm to you or damage to the machine.
Warranty
Each Thermal-Copier has passed several tests (function, operation, electrical) both during and after
manufacture. The warranty period is 30 days from purchase, extended to a full 12 Months (via a free 11
month warranty upgrade) where the warranty is validated by completing and returning the warranty form
within 30 Days of purchase. See warranty form supplied with machine for full details.
Contents
Page
Contents
2
Electrical Safety Advice
3
3
4
Artwork Types and Preparation
5
6
Imaging ScreenMaster Screen Printing Mesh
7
Imaging Oversized Screens - A4 designs on A3 size mesh
9
Cleaning and Maintenance
9
Sales, Supplies and Support
Please contact your place of purchase for supplies of carriers and additional materials:
Phone:(02) 9979 9700
Supplies and Orders - www.nehoc.com.au/shop
Machine support - www.nehoc.com.au/go/tca4
Fax: (02) 9979 9201
Postal: PO Box 175, NARRABEEN NSW 2101
1
NTCA4 A4 Thermal-Copier Guide (V9.118)
E-mail: support@nehoc.com.au
© 2008 NEHOC Australia Pty Ltd
Advertisement
Summary of Contents for Nehoc A4AU Series
-
Page 1: Operation Guide
Please contact your place of purchase for supplies of carriers and additional materials: Supplies and Orders - www.nehoc.com.au/shop Machine support - www.nehoc.com.au/go/tca4 Phone:(02) 9979 9700 Fax: (02) 9979 9201 E-mail: support@nehoc.com.au Postal: PO Box 175, NARRABEEN NSW 2101 © 2008 NEHOC Australia Pty Ltd... - Page 2 NEHOC Australia Pty Ltd. This document is intended to be used as a guide only, NEHOC Australia Pty Ltd may not be held responsible for any fault or misinterpretation that may occur from its use by the customer.
-
Page 3: Machine Location
Turn the machine on (Green light will illuminate), press Feed Button ( 3) to rotate Glass Roller With locks loose, rubber removed and the Glass Roller rotated your machine is now unlocked and ready for use. © 2008 NEHOC Australia Pty Ltd... - Page 4 Reuse will transfer carbon back to the paper 9. Artwork is now prepared and ready to image a screen. • If artwork is not used within 5 minutes repeat this process as the paper will begin to absorb moisture © 2008 NEHOC Australia Pty Ltd...
-
Page 5: Imaging Tattoo Spirit/ Transfer Paper
• For best results pat the back of paper with damp cloth. Use caution not to rub hard or the paper may move causing a smudged design © 2008 NEHOC Australia Pty Ltd... - Page 6 Adjust the imaging setting if required. With your screen now imaged you are ready to mount your screen to a frame for printing. © 2008 NEHOC Australia Pty Ltd...
- Page 7 • Pull the mesh over onto the back of the artwork • Tape down against the back of the artwork • Do not fold or crease the edge © 2008 NEHOC Australia Pty Ltd...
- Page 8 If required you may keep the tape attached to the mesh and simply remove from the artwork. Fold the tape back onto the ScreenMaster mesh as this part of the screen will be attached to the frame and will not effect printing. © 2008 NEHOC Australia Pty Ltd...
-
Page 9: Troubleshooting
No carrier or the wrong carrier was used. Always use a carrier. Models CS04 (tefl on Carrier does not bear the heat. cover) and R-TCA4 (budget cover) Additional Troubleshooting, How to and Support - http://www.thermal-copier.com/support © 2008 NEHOC Australia Pty Ltd...