Chevrolet 2012 Corvette Navigation System User Manual page 85

You may end voice recognition
by not speaking any commands.
After about five seconds of silence,
the system automatically cancels
voice recognition.
At times, the system may not
understand a spoken command.
If this happens, try again. If a
spoken command is not available,
the system provides feedback
based on availability.
While using voice recognition, make
sure to keep interior noise levels
to a minimum. Otherwise, the
system might not recognize
voice commands.
The system only recognizes
commands spoken in English.
Voice Recognition Commands
The following list shows all of the
voice commands available for the
navigation system with a brief
description of each. Any words
shown in square brackets are
optional. If there are words
shown in parentheses, choose
one of the options. To use the
voice commands, refer to the
instructions listed previously.
Help Commands
These commands are universal and
enable you to use the help prompts
available from the system.
Command Help/List: Enables
the system to provide the available
commands for the navigation radio.
Cancel: Cancels the voice
recognition function.
Infotainment System
Radio Commands
Radio: Changes the audio system
to the next radio audio source.
AM: Changes the audio system to
the AM audio source.
FM1: Changes the audio system to
the FM1 audio source.
FM2: Changes the audio system to
the FM2 audio source.
XM1: Changes the audio system to
the XM1 audio source.
XM2: Changes the audio system to
the XM2 audio source.
Power On, Audio On: Turns the
system's power on.
Power Off, Audio Off: Turns the
system's power off.
Seek Up: The selected audio
source seeks to the next strongest
station.
Seek Down: The selected audio
source seeks down to the next
strongest station.
85