Operating Your Radio - Search Tuning Fm - Sangean DPR-17 User Manual

Operating your radio – Search tuning FM
1. Fully extend the antenna above the radio. Press the Power button to
switch on your radio.
2. Press the Band button to select the FM band.
3. Press and release the Tuning control , your radio will scan in an
upwards direction (low frequency to high frequency) and stop
automatically when it finds a station of sufficient strength.
4. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data preset then the radio will display the station name.
5. To find other stations, press and release the Tuning control as before.
6. When the waveband is reached will recommence from the opposite
end of the waveband end.
7. Adjust the volume control to the required setting.
8. To switch off your radio press the Power button.
2
3,5
7
GB
18