Unpacking; Description; Safety Instructions - Spartan PROvision Touch Owner's Manual

Before signing the shipping receipt, check and inspect unit for visible damage. If there is visible damage,
note so on the shipping receipt.
The system is composed of a miniature closed circuit television camera and color LCD touchscreen
monitor connected through flexible push type cable.
This unit operates on internal battery power and 110/220 Volt AC electrical current.
WARNING: READ THE "OPERATOR'S MANUAL" THOROUGHLY BEFORE USING ANY SPARTAN
TOOL PRODUCT. DRAIN/SEWER CLEANING CAN BE DANGEROUS IF PROPER PROCEDURES
ARE NOT FOLLOWED. KNOW THE PROPER OPERATION, CORRECT APPLICATIONS AND THE
LIMITATIONS OF ALL SPARTAN TOOL PRODUCTS BEFORE USE.
CAUTION #1
Use of any electrical equipment in a wet environment can cause fatal shock if equipment is
not properly grounded, adequately maintained, and if care is not used by the operator.
A. GROUNDING INSTRUCTIONS —
Before charging your Spartan PROvision Touch, make sure a properly grounded, three hole electrical
outlet is available. If not, as in some older homes, use a three-prong adapter and connect the
green pigtail (or grounding lug) to a known ground such as a cold water pipe. Never cut off the
grounding prong for use in a two hole outlet receptacle. By doing so, you have cut off your protection
from shock.
The Spartan PROvision Touch must be grounded while charging or operating using the 110V
power cord to protect the operator from electrical shock. The Spartan PROvision Touch comes
with a three-conductor cord and three-prong grounding type plug to fit the properly grounded
receptacle. An adapter, see sketches (B) and (C), is available for connecting, sketch (A) type
plugs, to a two-prong receptacle, except in Canada.

Unpacking

Description

Safety Instructions

Page 6