Specifications - Crown Macro-Tech 2402 Operation Manual

MA 2402 Power Amplifier

8 Specifications

Operation Manual
Minimum Guaranteed Power
120 VAC, 60 Hz Units, Stereo mode, per channel, both channels driven
1 kHz with 0.1% THD
Stereo, 2 ohms per ch.
Stereo, 4 ohms per ch.
Stereo, 8 ohms per ch.
120 VAC, 60 Hz Units, Bridge mono mode
1 kHz with 0.1% THD
4 ohms
8 ohms
16 ohms
120 VAC, 60 Hz Units, Parallel mono mode
1 kHz with 0.1% THD
1 ohm
2 ohms
4 ohms
Performance
Frequency Response (at 1 watt, 20 Hz - 20 kHz)
Phase Response (at 1 watt, 10 Hz - 20 kHz)
Signal to Noise Ratio below rated full bandwidth power
20 Hz to 20 kHz
A-weighted
Total Harmonic Distortion (THD) at rated power, from 20 Hz to 1 kHz
Total Harmonic Distortion (THD) at rated power, at 20 kHz
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1,
from 163 milliwatts to full bandwidth power
Damping Factor: 10 Hz to 400 Hz
Crosstalk (below rated power, 20 Hz to 1 kHz)
Controlled Slew Rate
Input Impedance (nominal) balanced, unbalanced
Macro-Tech 2402
1,050 W
800 W
520 W
2,070 W
1,585 W
1,035 W
2,080 W
1,605 W
1,035 W
Macro-Tech 2402
± 0.1 dB
± 10°
> 100 dB
> 105 dB
< 0.05%
0.1%
< 0.05%
> 1000
> 85 dB
> 13 volts/microsecond
20 k ohms, 10 k ohms
page 21