Table of Contents
Advertisement
3.7
PERSONALITY
MENU
【PERSONALITY】
● Enter the【PERSONALITY】mode to select DMX mode:【TOUR】,【TR16】,
【ARC.1】,【AR1.D】,【ARC.2】,【AR2.D】,【AR2.S】or【HSV】
3.8
SPECIAL SETTINGS
SET
【SETTING】
【KEY】
● Enter the【KEY】mode to select whether the access password is on or off.
● When the fixture is set as PASS 【ON】, after 30 seconds or turn on the fixture
next time, the fixture will need an access password to enter the display menu
control.
Note: The factory access password is【UP】+【DOWN】+【UP】+【DOWN】,
then press 【ENTER】to confirm the access.
● Select【UPLD】to upload the custom programs from the current MASTER unit to
the SLAVE units.
● In order to activate the upload function the password must be entered.
● Password is the same as the main access password.
● When uploading the MASTER and SLAVE units will display YELLOW.
● If an error occurs when uploading the MASTER and/or SLAVE units will display RED.
● On successful uploading of the custom programs the MASTER and SLAVE units
will display GREEN.
● In order to reset custom modes to default values select 【REST】.
● 【COLOR】 is for activate/unactivate the color calibration functions.
When 【RGBW】is selected, on RGBW = 255,255,255, 255 the color is displayed as calibrated
in CAL2 -- RGBW. When【COLOR】 is set 【OFF】, on RGBW = 255,255,255,255 the RGBW
values are not adjusted and the output is most powerful.
When [UC] is selected, the RGB output are adjusted to a standard preset universal color
which balances fixtures from different generations..
●
【LIFE】BATTERY LIFE ; LONG for extended battery operation (approx. 10hrs), NORM
for standard battery operation (approx. 8hrs).
PERS
TOUR
ARC.1
AR1.D
HSV
BLOC
KEY
ON
OFF
PASS
UPLD
PASS
REST
COLOR
OFF
RGBW
UC
DIM
DIM4
DIM1
DIM2
DIM3
O F F
CURV
OFF
Cv1
Cv2
Cv3
O F F
DERR
SAVE
BLAK
O F F
SLCK
OFF
ON
O F F
SPEC
STRB
CLAS
LIFE
LONG
NORM
·7·
SEND
END
REST
END
Advertisement
Table of Contents
